Anti-green deposit treatment
SEKO Green Deposit Shock Treatment is an aqueous solution of anionic surfactants. It deeply cleans washable surfaces and leaves no residue or marks on glass surfaces.
Treats up to 100m2. Cleans and removes stubborn stains.
Application on vertical and horizontal surfaces
Product suitable for us on all surfaces: Brick, stone, plaster walls, concrete, mortar, plastic, glass, earthenware, polyester, painted surfaces, etc.
Acts quickly and leaves no traces on the materials whose preservation it improves.
Can be painted or covered with plaster once dirt has been removed.
No chlorine or neonicotinoid derivatives
It removes green deposits, lichens, greasy or oily dirt, insect stains, soot dust, smoke, …
It can be used on all hard surfaces such as terraces, walls, slabs, interlocking paving stones …
Are you interested in this product?
Detailed information
Ready-to-use product for use in a high-pressure cleaner (via the bypass or the tank provided for this purpose).
Action in a minimum of 15 to 20 minutes. 100% effective after 30 minutes
Mandatory rinsing with a high-pressure washer
Active ingredients: Anionic surfactants: <5%
Orange coloured liquid
pH: > 12
~+/- 1.04 kg/l (at + 25°C)
NA.
from 0.06% to 0.1%
Water: complete
NA
Box of 4 units
Keep away from frost and heat
3 years in its original packaging.
Consumption depends on the surface area to be treated.
Approximately 50g/m2 per treatment
Optimal application period from January to December
+5°C / +35°C.
+5°C / +35°C
SEKO Anti-Green Deposit Shock Treatment is delivered ready to use for use with a high-pressure washer
SEKO Green Deposit Shock Treatment must be applied with a high-pressure washer (via the bypass or tank provided for this purpose) working from the bottom up and avoiding drips.
Leave on for 15 to 20 minutes, then rinse thoroughly using a high-pressure washer with hot or cold water.
Do not apply in rainy or windy weather.
Important: Always apply the treatment with your back to the wind
Immediately clean tools with water after use.
Our products are covered by civil liability insurance.
« The information in this notice, and in particular the recommendations relating to the application and end use
of Sodepac products, is provided in good faith and is based on the knowledge and experience that the company Sodepac has acquired to date of its products when they have been properly stored, handled and applied under normal conditions. In practice, the differences between materials, substrates and specific site conditions are such that this information or any written recommendation or advice given does not imply any guarantee of merchantability other than the legal guarantee against hidden defects. We remain at your disposal if you require any further information. We cannot be held liable in any way for any application that does not comply with our information.
The property rights held by third parties must be respected at all costs. All orders are accepted subject to our current General Terms and Conditions of Sale and Delivery. Users must consult the most recent version of the technical sheet for the product in question, which will be provided upon request.”
Safety data sheets are available on www.quickfds.com or upon simple request from Sodepac.
