Professional cleaner and degreaser
SEKO Cleaner is a ready-to-use aqueous solution of anionic surfactants. It deeply cleans washable surfaces and leaves no residue or marks on glass surfaces. Treats up to 100m2. Cleans and removes stubborn stains.
Application on vertical and horizontal surfaces
- Product suitable for us on all surfaces: Brick, stone, plaster walls, concrete, mortar, fibre cement, slate, tile, shingle, plastic, glass, fibre, cement, earthenware, polyester, wood, painted surfaces, etc.
- Acts quickly and leaves no traces on the materials whose preservation it improves.
- Can be painted or covered with plaster once dirt has been removed.
It removes greasy or oily stains, insect stains, soot dust, smoke.
It dissolves and removes road film from vehicle bodywork, tarpaulins, containers, signage equipment, signs, street furniture, washable metal or painted surfaces, plastics, rubber pads and mats, windows, glass panel facades…
Are you interested in this product?
Detailed information
Ready-to-use product, effective in a minimum of 15 to 20 minutes. 100% effective after 30 minutes
Can be used neat or diluted. NHP Compatible
Active ingredients: Anionic surfactants: <5%
Orange coloured liquid
pH: > 12
~+/- 1.04 kg/l (at + 25°C)
NA.
from 0.06% to 0.1%
Water: complete
NA
Box of 4 units
1/2 Box of 60 units
Keep away from frost and heat
3 years in its original packaging.
Consumption depends on the surface area to be treated
Approximately 200g/m2 per treatment
Optimal application period from January to December
+5°C / +35°C.
+5°C / +35°C
SEKO cleaner is delivered ready-to-use
Wet the surfaces beforehand.
SEKO Cleaner can be applied with a brush, paint brush, roller, high-pressure sprayer or as an active foam using a foam gun or foam barrel, working from the bottom up and avoiding drips.
On horizontal surfaces, apply SEKO Cleaner with a brush
avoiding excessive accumulation of the product.
Leave on for 15 to 20 minutes, then rinse thoroughly with hot or cold water under pressure.
Do not apply in rainy or windy weather.
Immediately clean tools with water after use.
Our products are covered by civil liability insurance.
The information in this notice, and in particular the recommendations relating to the application and end use
of Sodepac products, is provided in good faith and is based on the knowledge and experience that the company
Sodepac has acquired to date of its products when they have been properly stored, handled and applied under normal conditions.
In practice, the differences between materials, substrates and specific site conditions are such that this
information or any written recommendation or advice given does not imply any guarantee of merchantability other than the legal guarantee against hidden defects.
We remain at your disposal if you require any further information. We cannot
be held liable in any way for any application that does not comply with our information.
The property rights held by third parties must be respected at all costs. All orders are accepted subject
to our current General Terms and Conditions of Sale and Delivery. Users must consult the
most recent version of the technical sheet for the product in question, which will be provided upon request.”
Safety data sheets are available on www.quickfds.com or upon simple request from Sodepac.
