Professional degreasing renovator
SEKO Professional Renovator is a ready-to-use aqueous solution of anionic surfactants. It thoroughly cleans all types of terraces (wood, teak, exotic wood, paving stones, interlocking, tiles, slabs…).
Treats up to 125m2.
Powerful active ingredients: deeply cleanses and removes impurities. Effective immediately if applied via NHP
Application on vertical and horizontal surfaces
Product suitable for us on all surfaces: Brick, stone, plaster walls, concrete, mortar, fibre cement, slate, tile, shingle, plastic, glass, fibre, cement, earthenware, polyester, wood, painted surfaces, etc.
Acts quickly and leaves no traces on the materials whose preservation it improves.
Can be painted or covered with plaster once dirt has been removed.
It removes greasy or oily stains, insect stains, soot dust, smoke.
It dissolves and removes road film from vehicle bodywork, tarpaulins, containers, signage equipment, signs, street furniture, washable metal or painted surfaces, plastics, rubber pads and mats, windows, glass panel facades…
Are you interested in this product?
Detailed information
Ready-to-use product, effective in a minimum of 15 to 20 minutes.
To dilute
Active ingredients: Anionic surfactants: <5%
Orange coloured liquid
pH: >13
~+/- 1.04 kg/l (at + 25°C)
NA.
of 0.6% according to directive 2010/75/EC
Water: complete
NA
5-litre containers—Box of 4 units
20-litre containers—Pallet of 24 containers
Keep away from frost and heat
3 years in its original packaging.
Consumption depends on the surface area to be treated
Approximately 200g/m2 per treatment
Optimal application period from January to December
+5°C / +35°C.
+5°C / +35°C
SEKO Professional Renovator must be diluted
Wet the surfaces beforehand.
SEKO Cleaner can be applied with a brush, paint brush, roller, high-pressure sprayer or as an active foam using a foam gun or foam barrel, working from the bottom up and avoiding drips.
On horizontal surfaces, apply SEKO Cleaner with a brush avoiding excessive accumulation of the product.
Leave on for 15 to 20 minutes, then rinse thoroughly with hot or cold water under pressure.
Do not apply in rainy or windy weather.
Immediately clean tools with water after use.
Our products are covered by civil liability insurance.
« The information in this notice, and in particular the recommendations relating to the application and end use
of Sodepac products, is provided in good faith and is based on the knowledge and experience that the company Sodepac has acquired to date of its products when they have been properly stored, handled and applied under normal conditions. In practice, the differences between materials, substrates and specific site conditions are such that this information or any written recommendation or advice given does not imply any guarantee of merchantability other than the legal guarantee against hidden defects. We remain at your disposal if you require any further information. We cannot be held liable in any way for any application that does not comply with our information.
The property rights held by third parties must be respected at all costs. All orders are accepted subject to our current General Terms and Conditions of Sale and Delivery. Users must consult the most recent version of the technical sheet for the product in question, which will be provided upon request.”
Safety data sheets are available on www.quickfds.com or upon simple request from Sodepac.
