Moss remover : a key solution for a sustainable and aesthetic home
For any questions about our products, contact us!
Frequently Asked Questions (FAQ)
In the Lille metropolitan area at Hallennes-lez-Haubourdin, France. Our range is produced
exclusively in France.
SEKO moss remover must be applied to a dry surface using a brush, roller, low-pressure sprayer or airless spray gun working from the bottom up and avoiding drips.
On horizontal surfaces, apply the SEKO moss remover to the surface using a brush or hand sprayer without allowing the product to build up too much.
Do not use a high-pressure cleaner on roofs.
Wait for the surface to dry (i.e. +/- 12 hours) between applications.
Wait until the end of the moss removal treatment, i.e. five to 10 days depending on the
product. Apply the waterproofing agent to a clean, moss-free surface.
Applying bleach to surfaces may seem effective because the results are quick. However, the bleach will damage the surfaces and make them porous causing the problem to recur more quickly and more severely; indeed, moss will stick to these surfaces more easily. According to biocide regulations, bleach is prohibited for this type of treatment.
Yes, you can apply our cleaner to shingles. SEKO cleaner can be used to clean and treat all types of surfaces: brick, stone, plaster, concrete, mortar, fibre cement, slate, tile, glass, plastic, earthenware, polyester, wood, painted surfaces, tiling, etc.
No, because it can leave marks.
Direct contact can be harmful to your plants because it is a biocide. We recommend diverting the inlet to the water collection tanks when applying the product; even if, once diluted in a large quantity of water, the impact of the product is limited.
In the event of any contact with the eyes or body, rinse carefully with water for several minutes. Remove any contact lenses if the victim wears them and they can be easily removed, and continue rinsing.
Always make sure that you rinse your tools with water after using our products.
Moss removers : No.
Store at a temperature above 5°C. Exposure to negative temperatures will have an irreversible effect. Our moss remover can be stored for two years in its original packaging. Shake before reuse.