Treatment for building materials.
SEKO Professional Water Repellent is a ready-to-use aqueous solution of modified alkoxysilane/polydimethylsiloxane (non-film-forming effect).
It is used as a water repellent agent for building materials (cellular concrete, paving, bricks, tiles, facing stones) and insulation materials (perlite, vermiculite).
Treats up to 25m2 depending on the porosity of the substrate.
Application on vertical and horizontal surfaces
- Product suitable for us on all surfaces: Brick, stone, plaster walls, concrete, mortar, fibre cement, slate, tile, shingle, fibre, cement, painted surfaces, etc.
Acts quickly, does not discolour and leaves no marks on the materials whose preservation it improves (reduces the tendency to become dirty, prevents damage caused by freeze/thaw cycles and efflorescence) - Gives the treated material optimised water-repellent properties, reduced water absorption and good air permeability
- Can be combined with SEKO anti-moss to achieve an excellent water-repellent and fungicidal effect.
- Protection against water infiltration on façades, walls…
Treatment of hard surfaces of all kinds (cellular concrete, paving, bricks, tiles, facing stones) and insulation materials (perlite, vermiculite) found in the building industry:
After waterproofing treatment, to limit reseeding by microorganisms
Periodically, when the first signs of water damage appear, on surfaces intended to remain untreated.
Are you interested in this product?
Detailed information
Ready-to-use product, effective in a few hours
Active ingredient: Modified alkoxysilane/polydimethylsiloxane, solvent-free
Milky white liquid
pH: 9.5 – 10.5
1
NA.
This product does not contain any significant quantities of VOCs in accordance with Directive 2010/75/EC
Emulsifiable in water
NA
1-litre containers—Box of 8 units, pallets of 24 boxes
Keep away from frost and heat
3 years in its original packaging.
Consumption depends on the surface area to be treated.
Approximately 200g/m2 per treatment
Optimal application period from March to October
+5°C / +35°C.
+5°C / +35°C
SEKO Professional Water Repellent is delivered ready to use and should not be diluted
SEKO Professional Water Repellent should be applied to a dry surface using a brush, sprayer or by dipping, working from the bottom up and avoiding drips.
On horizontal surfaces, apply SEKO Professional Water Repellent with a brush, avoiding excessive accumulation of the product.
Our products are covered by civil liability insurance.
The information in this notice, and in particular the recommendations relating to the application and end use
of Sodepac products, is provided in good faith and is based on the knowledge and experience that the company
Sodepac has acquired to date of its products when they have been properly stored, handled and applied under normal conditions.
In practice, the differences between materials, substrates and specific site conditions are such that this
information or any written recommendation or advice given does not imply any guarantee of merchantability other than the legal guarantee against hidden defects.
We remain at your disposal if you require any further information. We cannot
be held liable in any way for any application that does not comply with our information.
The property rights held by third parties must be respected at all costs. All orders are accepted subject
to our current General Terms and Conditions of Sale and Delivery. Users must consult the
most recent version of the technical sheet for the product in question, which will be provided upon request.”
Safety data sheets are available on www.quickfds.com or upon simple request from Sodepac.
