Preventive treatment against green deposits
SEKO Professional Anti-green Deposits is a ready-to-use quaternary ammonium solution.
It is characterised by its curative action on microorganisms, green deposits, green algae, mould, lichens, fungi…
Treats up to 125m2. Maintenance every 2 years
Treatment of all types of hard surfaces (stone, cement, tiles, plaster) found in the building industry:
- Before painting, to prevent deterioration of the paint film by microorganisms, a defect that would be wrongly attributed by the customer to the quality of the paint or application
- Periodically, when the first signs of discolouration appear, on surfaces intended to remain untreated.
Application on vertical and horizontal surfaces
- Product suitable for us on all surfaces: Brick, stone, plaster walls, concrete, mortar, fibre cement, slate, tile, shingle, fibre, cement, plaster, earthenware, polyester, wood, painted surfaces, etc.
- Acts quickly and leaves no traces on the materials whose preservation it improves
- Long-lasting preventive effect
- Can be painted or covered with plaster once moss and lichens have been removed.
- No chlorine or bleach
Are you interested in this product?
Detailed information
Ready-to-use, but can be diluted. 100% active after 3 hours without rain.
CEBTP test report no. BEB6.F.3083-1/1
Active ingredient: 25g/kg of N,N dimethyl alkyl benzyl ammonium chloride + 2.9g/kg of octylisothiazolone
Green liquid
pH: 6.5 – 7.5
1,05
NA.
This product does not contain any significant quantities of VOCs in accordance with Directive 2010/75/EC
Total in water
NA
5-litre containers—Box of 4 units, pallets of 24 boxes
20-litre containers—Pallets of 24 containers
Keep away from frost and heat
18 months in its original packaging.
Consumption depends on the condition of the surface area to be treated: Approximately 125m2 per treatment
Optimal application period from March to October
+5°C / +35°C.
+5°C / +35°C
SEKO Pro Anti-Green Deposits is delivered ready to use but can also be diluted.
Scrape off excessive green deposits before treatment
- SEKO Pro Anti-Green Deposits should preferably be applied in the morning, on a cold, dry surface, using a brush, roller, low-pressure sprayer or “airless” spray gun, working from the bottom upwards and avoiding drips.
- On horizontal surfaces, apply SEKO Pro Anti-Green Deposits with a brush, avoiding excessive accumulation of the product.
- Do not rinse after application
Immediately clean tools with water after use.
“Use biocidal products with caution. Before use, read the label and product information.”
Our products are covered by civil liability insurance.
The information in this notice, and in particular the recommendations relating to the application and end use
of Sodepac products, is provided in good faith and is based on the knowledge and experience that the company
Sodepac has acquired to date of its products when they have been properly stored, handled and applied under normal conditions. In practice, the differences between materials, substrates and specific site conditions are such that this
information or any written recommendation or advice given does not imply any guarantee of merchantability other than the legal guarantee against hidden defects. We remain at your disposal if you require any further information. We cannot be held liable in any way for any application that does not comply with our information.
The property rights held by third parties must be respected at all costs. All orders are accepted subject
to our current General Terms and Conditions of Sale and Delivery. Users must consult the
most recent version of the technical sheet for the product in question, which will be provided upon request.”
Safety data sheets are available on www.quickfds.com or upon simple request from Sodepac.
